Boehlerit hardened, wear-resistant hoe blades

For heavier soils, such as clay and loam, finding hoe blades with a long service life remains a challenge. Hoe blades wear out more quickly on these soils, meaning they need to be replaced regularly. Wear-resistant blades are therefore desirable, but this immediately brings us to the second problem: do they stay sharp?

In our webshop, you will find hardened hoe blades from Boehlerit. These hardened hoe blades have carbide inserts on the front. These hard inserts provide a longer service life. The carbide inserts are highly wear-resistant and wear more slowly on the top. The blade wears mainly on the underside, which means the blades sharpen themselves during use. In short: wear-resistant and sharp, making them a durable choice!

The pointed tip helps the blade enter the soil smoothly and easily.

Below you can see the wear after 100, 350 and 600 hectares:

Boehlerit hardened hoe blades are available with different mounting angles: 53.5 degrees (A1), 30 degrees (A2) and 45 degrees (F1). A blade with a welded 30 x 10 mm shank (ST) is also available.

The following brands are compatible with the different blade types:

A1: including Einböck
A2: including Schmotzer and Einböck
F1: including Steketee and Kongskilde
ST: universal, suitable for many brands, including HAK, Garford, K.u.l.t. Kress, Hatzenbichler and others.

The following Boehlerit blade sizes are available:

• 10 cm

• 12 cm

• 14 cm

• 15 cm

• 16 cm

• 18 cm

• 20 cm

• 25 cm

For example: Are you looking for a 16 cm Boehlerit hoe blade with a 30-degree angle (A2)? Then the blade below is the right choice:

Boehlerit HS160 A2 hardened hoe blade

Not sure which blade you need? Feel free to contact us. Or take a look at our other hoe blades.